diff --git a/README.md b/README.md
index 8c250910008dc4a684347b50d209116e0980c01f..1526a08b841d33bcb05e5dfbb75769aca8977cb4 100644
--- a/README.md
+++ b/README.md
@@ -6,12 +6,13 @@
a silent flower blossom death strike to lost data.
Backupninja allows you to coordinate system backup by dropping a few
-simple configuration files into /etc/backup.d/. Most programs you
+simple configuration files into `/etc/backup.d/`. Most programs you
might use for making backups don't have their own configuration file
format. Backupninja provides a centralized way to configure and
coordinate many different backup utilities.
-Features:
+# Features
+
- easy to read ini style configuration files.
- you can drop in scripts to handle new types of backups.
- backup actions can be scheduled
@@ -20,9 +21,10 @@ Features:
- console-based wizard (ninjahelper) makes it easy to create
backup action configuration files.
- passwords are never sent via the command line to helper programs.
- - works with Linux-Vservers (http://linux-vserver.org/)
+ - works with [Linux-Vservers](http://linux-vserver.org/)
+
+# Backup types
-Backup types:
- secure, remote, incremental filesytem backup (via rdiff-backup).
incremental data is compressed. permissions are retained even
with an unpriviledged backup user.
@@ -31,105 +33,109 @@ Backup types:
- encrypted remote backups (via duplicity).
- backup of subversion repositories.
+# Options
+
The following options are available:
--h, --help This usage message
--d, --debug Run in debug mode, where all log messages are
- output to the current shell.
--f, --conffile FILE Use FILE for the main configuration instead
- of /etc/backupninja.conf
--t, --test Test run mode. This will test if the backup could run, without actually
- preforming any backups. For example, it will attempt to authenticate
- or test that ssh keys are set correctly.
--n, --now Perform actions now, instead of when they might be scheduled.
- No output will be created unless also run with -d.
---run FILE Runs the specified action FILE (e.g. one of the /etc/backup.d/ files).
- Also puts backupninja in debug mode.
-
-NINJAHELPER
+
+ - `-h`, `--help`: this usage message
+ - `-d`, `--debug`: run in debug mode, where all log messages are
+ output to the current shell.
+ - `-f`, `--conffile FILE`: use FILE for the main configuration
+ instead of `/etc/backupninja.conf`
+ - `-t`, `--test`: test run mode. This will test if the backup could
+ run, without actually preforming any backups. For example, it will
+ attempt to authenticate or test that ssh keys are set correctly.
+ - `-n`, `--now`: perform actions now, instead of when they might
+ be scheduled. No output will be created unless also run with -d.
+ - `--run FILE`: runs the specified action `FILE` (e.g. one of the
+ `/etc/backup.d/` files). Also puts backupninja in debug mode.
+
+ninjahelper
===========
-Ninjahelper is an additional script which will walk you through the process of
+ninjahelper is an additional script which will walk you through the process of
configuring backupninja. Ninjahelper has a menu driven curses based interface
(using dialog).
To add an additional 'wizard' to ninjahelper, follow these steps:
-(1) to add a helper for the handler "blue", create the file
- blue.helper in the directory where the handlers live.
- (ie /usr/share/backupninja).
+1. to add a helper for the handler "blue", create the file
+ `blue.helper` in the directory where the handlers live.
+ (ie `/usr/share/backupninja`).
+
+2. next, you need to add your helper to the global `HELPERS` variable
+ and define the main function for your helper (the function name
+ is always `<helper>_wizard`). for example, `blue.helper`:
-(2) next, you need to add your helper to the global HELPERS variable
- and define the main function for your helper (the function name
- is always <helper>_wizard). for example, blue.helper:
- HELPERS="$HELPERS blue:description_of_this_helper"
- blue_wizard() {
- ... do work here ...
- }
+ HELPERS="$HELPERS blue:description_of_this_helper"
+ blue_wizard() {
+ ... do work here ...
+ }
-(3) look at the existing helpers to see how they are written. Try to re-use
- functions, such as the dialog functions that are defined in easydialog.sh,
- or the vserver functions defined in lib/vserver.
+3. look at the existing helpers to see how they are written. Try to re-use
+ functions, such as the dialog functions that are defined in `easydialog.sh`,
+ or the vserver functions defined in `lib/vserver`.
-(4) test, re-test, and test again. Try to break the helper by going backwards,
- try to think like someone who has no idea how to configure your handler
- would think, try to make your helper as simple as possible. Walk like a cat,
- become your shadow, don't let your senses betray you.
+4. test, re-test, and test again. Try to break the helper by going backwards,
+ try to think like someone who has no idea how to configure your handler
+ would think, try to make your helper as simple as possible. Walk like a cat,
+ become your shadow, don't let your senses betray you.
-CONFIGURATION FILES
+Configuration files
===================
-The general configuration file is /etc/backupninja.conf. In this file
+The general configuration file is `/etc/backupninja.conf`. In this file
you can set the log level and change the default directory locations.
-You can force a different general configuration file with "backupninja
--f /path/to/conf".
+You can force a different general configuration file with `backupninja
+-f /path/to/conf`.
To preform the actual backup, backupninja processes each configuration
-file in /etc/backup.d according to the file's suffix:
+file in `/etc/backup.d` according to the file's suffix:
- .sh -- run this file as a shell script.
- .rdiff -- filesystem backup (using rdiff-backup)
- .dup -- filesystem backup (using duplicity)
- .mysql -- backup mysql databases
- .pgsql -- backup PostgreSQL databases
- .sys -- general hardware, partition, and system reports.
- .svn -- backup subversion repositories
- .maildir -- incrementally backup maildirs (very specialized)
+ - `.sh`: run this file as a shell script.
+ - `.rdiff`: filesystem backup (using rdiff-backup)
+ - `.dup`: filesystem backup (using duplicity)
+ - `.mysql`: backup mysql databases
+ - `.pgsql`: backup PostgreSQL databases
+ - `.sys`: general hardware, partition, and system reports.
+ - `.svn`: backup subversion repositories
+ - `.maildir`: incrementally backup maildirs (very specialized)
Support for additional configuration types can be added by dropping
-bash scripts with the name of the suffix into /usr/share/backupninja.
+bash scripts with the name of the suffix into `/usr/share/backupninja`.
The configuration files are processed in alphabetical order. However,
it is suggested that you name the config files in "sysvinit style."
For example:
- 00-disabled.pgsql
- 10-runthisfirst.sh
- 20-runthisnext.mysql
- 90-runthislast.rdiff
-Typically, you will put a '.rdiff' config file last, so that any
+ 00-disabled.pgsql
+ 10-runthisfirst.sh
+ 20-runthisnext.mysql
+ 90-runthislast.rdiff
+
+Typically, you will put a `.rdiff` config file last, so that any
database dumps you make are included in the filesystem backup.
Configurations files with names beginning with 0 (zero) or ending with
-.disabled (preferred method) are skipped.
+`.disabled` (preferred method) are skipped.
Unless otherwise specified, the config file format is "ini style."
For example:
- # this is a comment
-
- [fishes]
- fish = red
- fish = blue
-
- [fruit]
- apple = yes
- pear = no thanks \
- i will not have a pear.
-
-
-SCHEDULING
+ # this is a comment
+
+ [fishes]
+ fish = red
+ fish = blue
+
+ [fruit]
+ apple = yes
+ pear = no thanks \
+ i will not have a pear.
+
+Scheduling
==========
By default, each configuration file is processed everyday at 01:00 (1
@@ -138,77 +144,79 @@ file.
For example:
- when = sundays at 02:00
- when = 30th at 22
- when = 30 at 22:00
- when = everyday at 01 <-- the default
- when = Tuesday at 05:00
+ when = sundays at 02:00
+ when = 30th at 22
+ when = 30 at 22:00
+ when = everyday at 01 <-- the default
+ when = Tuesday at 05:00
A configuration file will be processed at the time(s) specified by the
-"when" option. If multiple "when" options are present, then they all
+`when` option. If multiple `when` options are present, then they all
apply. If two configurations files are scheduled to run in the same
hour, then we fall back on the alphabetical ordering specified above.
If two configurations files are scheduled close to one another in
time, it is possible to have multiple copies of backupninja running if
the first instance is not finished before the next one starts.
-Make sure that you put the "when" option before any sections in your
+Make sure that you put the `when` option before any sections in your
configuration file.
-These values for 'when' are equivalent:
+These values for `when` are equivalent:
- when = tuesday at 05:30
- when = TUESDAYS at 05
+ when = tuesday at 05:30
+ when = TUESDAYS at 05
-These values for 'when' are invalid:
+These values for `when` are invalid:
- when = tuesday at 2am
- when = tuesday at 2
- when = tues at 02
+ when = tuesday at 2am
+ when = tuesday at 2
+ when = tues at 02
-REAL WORLD USAGE
+Real world usage
================
Backupninja can be used to implement whatever backup strategy you
choose. It is intended, however, to be used like so:
-(1) First, databases are safely copied or exported to /var/backups.
- Typically, you cannot make a file backup of a database while it
- is in use, hence the need to use special tools to make a safe copy
- or export into /var/backups.
+1. First, databases are safely copied or exported to `/var/backups`.
+ Typically, you cannot make a file backup of a database while it
+ is in use, hence the need to use special tools to make a safe copy
+ or export into `/var/backups`.
-(2) Then, vital parts of the file system, including /var/backups, are
- nightly pushed to a remote, off-site, hard disk (using
- rdiff-backup). The local user is root, but the remote user is not
- priviledged. Hopefully, the remote filesystem is encrypted.
+2. Then, vital parts of the file system, including `/var/backups`, are
+ nightly pushed to a remote, off-site, hard disk (using
+ rdiff-backup). The local user is root, but the remote user is not
+ priviledged. Hopefully, the remote filesystem is encrypted.
There are many different backup strategies out there, including "pull
style", magnetic tape, rsync + hard links, etc. We believe that the
-strategy outlined above is the way to go because: (1) hard disks are
-very cheap these days, (2) pull style backups are no good, because then
-the backup server must have root on the production server, and (3)
-rdiff-backup is more space efficient and featureful than using rsync +
-hard links.
+strategy outlined above is the way to go because:
+
+1. hard disks are very cheap these days;
+2. pull style backups are no good, because then the backup server must
+ have root on the production server;
+3. rdiff-backup is more space efficient and featureful than using
+ rsync + hard links.
-SSH KEYS
+SSH keys
========
In order for rdiff-backup to sync files over ssh unattended, you must
create ssh keys on the source server and copy the public key to the
remote user's authorized keys file. For example:
- root@srchost# ssh-keygen -t rsa -b 4096
- root@srchost# ssh-copy-id -i /root/.ssh/id_rsa.pub backup@desthost
+ root@srchost# ssh-keygen -t rsa -b 4096
+ root@srchost# ssh-copy-id -i /root/.ssh/id_rsa.pub backup@desthost
-Now, you should be able to ssh from user 'root' on srchost to
-user 'backup' on desthost without specifying a password.
+Now, you should be able to ssh from user `root` on `srchost` to
+user `backup` on `desthost` without specifying a password.
-Note: when prompted for a password by ssh-keygen, just leave it
+Note: when prompted for a password by `ssh-keygen`, just leave it
blank by hitting return.
-The included helper program "ninjahelper" will walk you through creating
+The included helper program `ninjahelper` will walk you through creating
an rdiff-backup configuration, and will set up the ssh keys for you.
@@ -218,44 +226,43 @@ Amazon Simple Storage Service (S3)
Duplicity can store backups on Amazon S3 buckets, taking care of encryption.
Since it performs incremental backups it minimizes the number of request per
operation therefore reducing the costs. The boto Python interface to Amazon
-Web Services is needed to use duplicity with S3 (Debian package: python-boto).
+Web Services is needed to use duplicity with S3 (Debian package: `python-boto`).
-VSERVERS
+Vservers
========
-If you are using Linux-Vservers (http://linux-vserver.org/) there are some
+If you are using [Linux-Vservers](http://linux-vserver.org/) there are some
special capabilities that different handlers have to make vserver
backups easier.
-Set the variable "vservers" to be "yes" in /etc/backupninja.conf and see the
+Set the variable `vservers` to be `yes` in `/etc/backupninja.conf` and see the
example configuration files for each handler to configure the vserver specific
variables.
-Additional vserver variables that can be configured in /etc/backupninja.conf,
+Additional vserver variables that can be configured in `/etc/backupninja.conf`,
but they probably don't need to be changed:
-VSERVERINFO (default: /usr/sbin/vserver-info)
-VSERVER (default: /usr/sbin/vserver)
-VROOTDIR (default: `$VSERVERINFO info SYSINFO |grep vserver-Rootdir | awk '{print $2}'`)
-
+ - `VSERVERINFO` (default: `/usr/sbin/vserver-info`)
+ - `VSERVER` (default: `/usr/sbin/vserver`)
+ - `VROOTDIR` (default: `$VSERVERINFO info SYSINFO |grep vserver-Rootdir | awk '{print $2}'`)
-.sh CONFIGURATION FILES
+.sh configuration files
=======================
Shell jobs may use the following features:
* logging and control flow functions:
- halt, fatal, error, warning, info, debug, passthru.
+ `halt`, `fatal`, `error`, `warning`, `info`, `debug`, `passthru`.
All such functions take a list of strings a parameters.
Those strings are passed to whatever logging mechanism is enabled,
and colored if relevant.
- * Using "exit N" is useless, and has unspecified consequences.
+ * Using `exit N` is useless, and has unspecified consequences.
Just don't do it.
- * when=TIME works as documented above; at may also be written
- "when = TIME".
+ * `when=TIME` works as documented above; at may also be written
+ `when = TIME`.
- * The $BACKUPNINJA_DEBUG environment variable is set when
- backupninja is invoked with the -d option.
+ * The `$BACKUPNINJA_DEBUG` environment variable is set when
+ backupninja is invoked with the `-d` option.